FRUG HOUSE, PRINCETON, N.J. (First scheme)
The first scheme is for a sloping site, the final one is for a flat site, both near a swimming pool on a small estate near Princeton. The clients stipulated a program accommodating at once, guests dressing room for the swimming pool, fallout shelter below and most importantly a place for their children's parties, winter or summer, away from the main house. Scheme One, is balloon frame over concrete bearing walls, focuses down toward the dramatic view of the stream by means of the row of Windows in the front, lower than the floor, and reinforced in section by the direction of the roof which is exaggeratedly low in front and high in back. The big, pseudo-hood of the fireplace parallels the slope of the roof plane and increases the sense of enclosure inside. This scheme was abandoned because of cost.(ZODIAC17, 1967)

FRUG HOUSE, PRINCETON, N.J. (Scheme Two)
Scheme Two is masonry. It faces the pool on flat land on the other side. It is a little building with big scale outside juxtaposed on smaller scale inside. The big, pseudo-hood of the fireplace along with the double front facade creates multiple enclosure. The single, huge opening on the outer facade is bisected by the wall behind where it accommodates the sliding door. The door within a door here gives access to the bunks when the sliding door is wide open in the summer. The dressing space for the swimming pool is upstairs and reached from the outside.(ZODIAC17, 1967)
* First scheme과 second scheme의 Site Plan이 뒤바뀌여 있다.

Dear Sir/Madam,
ReplyDeleteWe are architecture students at the University of Antwerp, Belgium, and we are currently working on a study of the Frug house by Robert Venturi and Denise Scott Brown.
We were wondering if you might be able to share any architectural plans, drawings, sections or dimensions of the Frughouse that were used to create the 3D model. We have been looking for accurate plans and measurements online, but unfortunately, we have only been able to find scans and images from Venturi’s book. This makes it quite difficult for us to accurately reconstruct the project.
If you have any plans, drawings, dimensions or other documentation that you are able to share with us, or if you could point us towards a source where we might find them, it would be a great help for our academic project.
Thank you very much for your time and help!
Kind regards,
Sterre Wijnen
Architecture student
University of Antwerp
Hi Sterre Wijnen
DeleteAs far as I know, this house was never actually built, so I think it is only natural that you cannot find precise dimensional data else where.
So I share the drawings (PDF files) which is redrawn by myself for teaching my students before.
It would help you in that these drawings include dimensions.
But I also should note that all the dimensions are assumed from the original hand drawn drawings in accordance with the only scale bar on the second scheme's plan.
Nevertheless, it would be enough to study the spatial configuration of Frug house.
Hope it would help.
https://drive.google.com/file/d/1DNVBlZge0Nz8JYRsJMCThont8oAgCv4K/view?usp=sharing
https://drive.google.com/file/d/18F4wzpjaXfoTI3VHanEAwey2ZHiTAsxy/view?usp=sharing
Geolocation : https://maps.app.goo.gl/CDqvvXrjjLt2vZPj9